Advertisement
1 P.E
1
8 8
1 P.E
1
I I
1 P.E
beep
beep
1
J
J
PROG
PROG
<1''
K K
AUTOMATIC DOOR RELEASE function
For internal receivers that support the AUTOMATIC DOOR RELEASE function only.
This function is used to open the entrance automatically when there is a call from the entry panel. No communication is
activated and the call ends automatically.
☞
Follow the instructions in the internal receiver manual.
Press one of the call keys on the entry panels to be reprogrammed, the LEDs
2 P.E
backlighting the call keys 8 will stop fl ashing. Repeat this operation on all the
entry panels to be reprogrammed 8 and 9.
If all the entry panels are reprogrammed, the confi guration will be as shown
in fi gure J.
To exit reprogramming, briefl y press the PROG key on the power supply K: the
PROG LEDs and the LEDs backlighting the keys will go out.
If no action is performed, the procedure will end automatically after 30 minutes.
2 P.E
2 P.E
M
If an entry panel is added, replaced or removed, the modifi cations
are acquired by going into "Programming Type of Keys" (from fi gure
6 to K).
Advertisement
