6.11 Section 11 – Check-out tests
Check:
This check-out is designed to give the technician the possibility to check the machine in its main categories,
before delivering it to the customer.
The first test (lower-thread sensor) as listed below will appear automatically on starting menu 11. On
successful completion of the test (lower-thread sensor) and confirming with
automatically.
Important!
If the test (lower-thread sensor) fails or is cancelled with
Program without saving the settings.
Check-out tests:
1
Lower-thread sensor, test 3c
2
Upper-thread sensor, test 4f
3
Balance, test 6b
4
Buttonhole calibration, test 6c
5
Lubrication and resetting the service stitches, test 1f
On completion of the last test and confirmation with
menu.
BERNINA International AG
Seestrasse 161
CH-8266 Steckborn
DRAFT – VERSION
, the next test follows
, the program returns from check-out to Service
, check-out program returns to Service Program main
Schweiz
Seite 155 von 172