Directed DIRECTECHS DB3 Installation Manual page 11

2013 volkswagen jetta
Hide thumbs Also See for DIRECTECHS DB3:
Table of Contents

Advertisement

Additional remote start connections
(Not all of these connections may be required for your installation. Refer to the wiring diagram for vehicle-specific connections.)
Wire
12 Volts
Accessory
Brake Wire [4] - Must use a diode
Ground
Hood Pin [1]
Ignition
Starter [4] - Must use a diode
Tachometer [2]
11
403.VW10 2.01 2013 Volkswagen Jetta
©2023 Directed. All rights reserved.
Connects To
Wire Location
VESCM under driver dash, black 73 pin plug, pin 68
Ignition Switch, black 10 pin plug, pin 3
VESCM under driver dash, black 73 pin plug, pin 43
VESCM under driver dash, black 73 pin plug, pin 27
Ignition Switch, black 10 pin plug, pin 8
Ignition Switch, black 10 pin plug, pin 4
Fuel Injector 1, 2 pin plug, pin 2
(+/-)
Wire Color
+
Red/Yellow (30A)
+
Black/Red
+
Black/Red (functions with ignition on only)
(chassis ground)
-
Brown/Green
+
Black/Violet
+
Red/Black
ac
Violet/Brown (2.0L); Red/Black (2.5L, TDI)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIRECTECHS DB3 and is the answer not in the manual?

Questions and answers

Table of Contents