Subscribe to Our Youtube Channel
Related Manuals for tousek LS 41
Summary of Contents for tousek LS 41
- Page 1 Installation and operating instructions Photocell LS 41, LS 180 LS 41 with fixed lens 180° 25° LS 180 with tiltable lens...
- Page 2 This manual is the sole property of the TOUSEK Ges.m.b.H. and may not be made available to competitors. All rights reserved. No part of it may be reproduced without our prior written permission.
- Page 3 The LS 41 has a fixed and th LS 180 a tiltable lens. As a special feature, the LS 41, LS 180 has a sync function (only with AC power available), which is is enabled on the transmit- ters by removing the jumper (J).
- Page 4 • The terminals of photocells LS 41 and LS 180 are identical • The LS 41 differs from the LS 180 by a fixed lens. The lens of the LS 180 is tiltable 180 ° horizontally and 25 ° vertically, thus ensuring precise alignment and flexible mounting options.
- Page 5 Important: Photocell connection The above diagrams are only general connection examples! in tousek control units photocell transmitters and receivers normally are connected to different voltage supply terminals. Therefore keep in mind the instructions and connection diagrams of the corresponding control board-...
- Page 6 ON: Photocell not aligned Receiver LED 1 (red) or interrupted Attention • The manufacturer can not be held liable for damages resulting from improper or unreasonable use of the photocell! - 6 - tousek / E_LS-41-180_01 / 14. 11. 2018...
- Page 7 • The opening (B) for cable feeder made must be sealed properly to prevent moisture entering into the housing!! max. Ø4 e.g. LS 41-receiver – PW-LED LED 1 2,0–2,7V DC e.g. LS 180-transmitter - 7 - tousek / E_LS-41-180_01 / 14. 11. 2018...
- Page 8 Buitenheide 2A/ 1 Tel. +32/ 11/ 91 61 60 Fax +32/ 11/ 96 87 05 your service partner: info@tousek.nl Tousek Sp. z o.o. Poland PL 43-190 Mikołów (k/Katowic) Gliwicka 67 Tel. +48/ 32/ 738 53 65 Fax +48/ 32/ 738 53 66 info@tousek.pl...
Need help?
Do you have a question about the LS 41 and is the answer not in the manual?
Questions and answers