Related Manuals for tousek Rollco LWA 115/1A
Summary of Contents for tousek Rollco LWA 115/1A
- Page 1 Installation and operating instructions Aluminium cantilever system Rollco LWA 115/1A ®...
-
Page 2: Maintenance
• Clean the inside of the profile. This manual is the sole property of the TOUSEK Ges.m.b.H. and may not be made available to competitors. All rights reserved. No part of it may be reproduced without our prior written permission. We will not accept liability for any claims resulting from misprints or errors. This edition of the manual replaces all earlier publications of the same. -
Page 3: General Features
INOX mounting plate, heavy-lift anchor, motor mounting plate for tousek sliding gate operators, end plates (aluminium), limit stops with and without support rollers, guide-in bracket (aluminium), guide bracket (stainless steel), turnbuckle (stainless... -
Page 4: Taking Into Operation
• Check the upper gate guiding. • Check the assembly screws. • Check if the door runs correctly into the guide-in bracket resp. guide-in fork bracket. • Clean the inside of the profile. - 4 - tousek / E_LWA-115/1A_40800708 / 29. 10. 2018... - Page 5 (13) turnbuckle (14) guide bracket guidance of gear rack (15) guide-in fork bracket (ZS) diagonal tie bar (DS) diagonal tie (SS) vertical tie mounting plate Ø12,5 foundation - 5 - tousek / E_LWA-115/1A_40800708 / 29. 10. 2018...
- Page 6 Version: Through bolts profile (TR) gate frame screwed all 500mm distance Ø15/2 welded-in Allen srews Important • the cantilever track and gate frame have to be connected together in a stable way! - 6 - tousek / E_LWA-115/1A_40800708 / 29. 10. 2018...
- Page 7 Eventually re-adjust them with the adjusting screws (S). • Now the cantilever profile with the mounted gate frame is put on the rolling gears - 7 - tousek / E_LWA-115/1A_40800708 / 29. 10. 2018...
- Page 8 (4a)– opposed to the back limit stop (4b) – has a support roller. • Both limit stops have to be inserted in the profile in the way, that the rubber bumpers show in direction of the rolling gears. - 8 - tousek / E_LWA-115/1A_40800708 / 29. 10. 2018...
- Page 9 The front end plate (1a) has two plastic guidings at the sides and has to be mounted at the side of the profile, which is running into the guide-in bracket. - 9 - tousek / E_LWA-115/1A_40800708 / 29. 10. 2018...
- Page 10 • When installation of the cantilever system is finished put both parts of the covers on each rolling gear, one from the left and the other from the right, and push them together. - 10 - tousek / E_LWA-115/1A_40800708 / 29. 10. 2018...
-
Page 11: Dimensioned Drawing
Ø77 Ø35 limit stop with limit stop support roller Rollco LWA 115/1A Rollco LWA 115/1A ® ® We reserve the right to change dimensions and technical specifications without prior notice. - 11 - tousek / E_LWA-115/1A_40800708 / 29. 10. 2018... - Page 12 Buitenheide 2A/ 1 Tel. +32/ 11/ 91 61 60 Fax +32/ 11/ 96 87 05 your service partner: info@tousek.nl Tousek Sp. z o.o. Poland PL 43-190 Mikołów (k/Katowic) Gliwicka 67 Tel. +48/ 32/ 738 53 65 Fax +48/ 32/ 738 53 66 info@tousek.pl...
Need help?
Do you have a question about the Rollco LWA 115/1A and is the answer not in the manual?
Questions and answers