Adjusting The Compression Damping Of The Fork - GAS GAS EX 250 2023 Owner's Manual

10 TUNING THE CHASSIS
10.14
40

Adjusting the compression damping of the fork

Info
The hydraulic compression damping determines the fork suspension behavior.
Info
This is due to the volume of the hose and not due to a
defect in the fork airpump or the fork.
Read the accompanying GASGAS Technical Accessories
instructions.
–
Adjust the air pressure as specified.
Guideline
Air pressure
Gradual changing of the air
pressure in steps of
Minimum air pressure
Maximum air pressure
Info
Never adjust the air pressure to a value outside the stated
range.
–
Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from the hose
– the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Turn adjuster
Info
Adjuster
–
Turn counterclockwise by the number of clicks corresponding to the
fork type.
Guideline
Compression damping
E01987-10
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise
to reduce damping during compression.
9.6 bar (139 psi)
0.2 bar (3 psi)
7 bar (102 psi)
12 bar (174 psi)
p. 43)
clockwise all the way to the stop.
1
is located at the upper end of the right fork leg.
17 clicks
12 clicks
7 clicks