Preparing For Rides At High Temperature And Slow Speed; Preparing For Riding At Low Temperatures Or In Snow - Husqvarna 125 XC-W 150 2017 Owner's Manual

8 PREPARING FOR USE
8.7

Preparing for rides at high temperature and slow speed

8.8

Preparing for riding at low temperatures or in snow

–
Mount the steel sprocket.
–
Clean the motorcycle. (
–
Carefully align bent radiator fins.
600868-01
–
Check the radiator cap.
Value on the radiator cap
» If the displayed value does not correspond to the setpoint value:
M01129-01
–
Change the radiator cap.
–
Adjust the secondary drive to the road conditions.
Info
The transmission oil heats up quickly when the clutch is operated frequently
due to an excessively high secondary drive.
–
Clean the chain.
Chain cleaner (
–
Clean the radiator fins.
600868-01
–
Straighten bent radiator fins carefully.
–
Check the coolant level. (
–
Mount the rain cover for the air filter.
Waterproofing device for air filter (79006921000)
Info
Follow the KTM PowerParts mounting instructions.
–
Adjust the carburetor jetting and setting.
Info
M01106-01
Your authorized KTM workshop can recommend the right carburetor tuning.
p. 115)
Warning
Danger of scalding During motorcycle operation, the coolant gets
very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling sys-
tem components if the engine or the cooling system are at oper-
ating temperature.
–
Allow the cooling system and the engine to cool down before you
open the radiator, the radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area affected immediately
with lukewarm water.
p. 143)
p. 100)
1.8 bar (26 psi)
34