Table of Contents
Advertisement
13
BRAKE SYSTEM
13.4
Checking the brake discs
Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
–
Make sure that worn-out brake discs are replaced immediately. (Your authorized KTM workshop will be glad to help.)
13.5
Checking the front brake fluid level
Warning
Danger of accidents An insufficient brake fluid level will cause the brake system to fail.
If the brake fluid level drops below the specified marking or the specified value, the brake system is leaking or the brake lin-
ings are worn down.
–
Check the brake system and do not continue riding until the problem is eliminated. (Your authorized KTM workshop will be
glad to help.)
Warning
Danger of accidents Old brake fluid reduces the braking effect.
–
Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule. (Your autho-
rized KTM workshop will be glad to help.)
–
Check the thickness of the front and rear brake discs at multiple points on each
brake disc to ensure it is at least thickness
Info
Wear reduces the thickness of the brake disc around the area used by the
brake linings.
Brake discs - wear limit (All standard EXC/XC-W models)
Front
400257-10
Rear
Brake discs - wear limit (All Six Days models)
Front
Rear
»
If the brake disc thickness is less than the specified value:
–
Change the front brake disc.
–
Change the rear brake disc.
–
Check the front and rear brake discs for damage, cracking, and deformation.
»
If the brake disc exhibits damage, cracking, or deformation:
–
Change the front brake disc.
–
Change the rear brake disc.
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Check the brake fluid level in the viewer
»
If the brake fluid has dropped below marking
–
Add front brake fluid.
E00340-10
.
2.5 mm (0.098 in)
3.5 mm (0.138 in)
2.5 mm (0.098 in)
3.7 mm (0.146 in)
.
:
(
p. 78)
77
Advertisement
Table of Contents
