11
TUNING THE CHASSIS
(All Six Days models)
–
Remove screws
lay it to one side.
–
Remove screws
–
Place the handlebar supports in the required position. Mount and tighten
screws
Guideline
Screw, handlebar support M10
–
Position the handlebar.
M00987-11
–
Position the handlebar clamps. Mount screws
Guideline
Screw, handlebar clamp
. Take off the handlebar clamps. Remove the handlebar and
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
. Take off the handlebar supports.
.
Info
Position the left and right handlebar supports evenly.
Info
Make sure the cables and wiring are positioned correctly.
Info
Make sure the gap widths are even.
40 Nm
Loctite
®
(29.5 lbf ft)
and tighten evenly.
M8
20 Nm
(14.8 lbf ft)
50
243™