Turn Signal Switch; Mode Button (If Equipped); Daytime Running Lights (Drl) Switch (If Equipped); High Beam Button - Triumph Street Cup Owner's Handbook Manual

Turn Signal Switch

When the turn signal switch is pushed
to the left or right, the corresponding
turn signals will flash on and off.
The indicators
manually. To manually turn off the
indicators, press
indicator switch in the central position.

MODE Button (if equipped)

The MODE button
response adjustment. Press and release
the MODE button to select one of the
different rider modes available (see
page 39 for more information).
Daytime Running Lights (DRL)
Switch (if equipped)
Note:
• Daytime running lights are manually
operated. They are not automatic.
The daytime running lights or dip beam
can be selected with the Daytime
Running Lights (DRL) switch.
To select daytime running lights, push
the DRL switch forward.
To select dip beam, push the DRL switch
rearwards.
When the daytime running lights are
turned on, the daytime running lights
indicator light will illuminate in the
instrument panel.
can be canceled
and release
allows throttle
General Information

High Beam Button

When the high beam button is pressed
the high beam will be switched on. Each
press of the button will swap between
dip and high beam.
Note:
the
• If daytime
installed on the motorcycle, the
high beam button has additional
functionality.
If the DRL switch is in the daytime
running lights position, then press and
hold the high beam button to turn the
high beam on. It will remain on as long
as the button is held in and will turn off
as soon as the button is released.
Note:
• A lighting on/off switch is not
installed on this model. The position
light, brake/tail light and license
plate light all function automatically
when the ignition is turned to the
ON position.
• The headlight will function when
the ignition switch is turned to the
ON position. The headlight will
go off while pressing the starter
button until the engine starts.
running lights are
51