Table of Contents
Advertisement
How to Ride the Motorcycle
Tires
High speed operation is hard on tires,
and tires that are in good condition are
crucial to riding safely. Examine their
overall condition, inflate to the correct
pressure (when the tires are cold), and
check the wheel balance. Securely fit
the valve caps after checking tire
pressures.
Observe
given
in
the
specification sections on tire checking
and tire safety.
Fuel
Have sufficient fuel for the increased
fuel consumption that will result from
high speed operation.
Caution
In many countries, the exhaust system
for this model is equipped with a
catalytic converter to help reduce
exhaust emission levels.
The
catalytic
permanently damaged if the motorcycle
is allowed to run out of fuel or if the fuel
level is allowed to get very low.
Always make sure you have adequate
fuel for your trip.
80
the
information
maintenance
converter
can
Engine Oil
Check that the engine oil level is correct.
Make sure that the correct grade and
type of oil is used when topping off.
Drive Chain
Make sure that the drive chain is
correctly
Inspect the chain for wear and damage.
and
Coolant
Check that the coolant level is at the
upper level line in the expansion tank.
Always check the level with the engine
cold.
Electrical Equipment
Make sure that all electrical equipment
such as the headlight, rear/brake light,
turn signals and horn all work correctly.
Miscellaneous
Visually check that all fasteners are
tight.
be
adjusted
and
lubricated.
Advertisement
Chapters
Table of Contents
