Turn Signal Switch; Mode Button; Daytime Running Lights (Drl) Switch (If Equipped); High Beam Light - Triumph Thruxton TFC 2019 Owner's Handbook Manual

General Information

Turn Signal Switch

When the turn signal switch is pushed
to the left or right, the corresponding
turn signals will flash on and off.
The indicators
manually. To manually turn off the
indicators, press
indicator switch in the central position.

MODE Button

The MODE button is used to select
different riding modes that have specific
throttle response and traction control
settings.
Press and release the MODE button
to select one of the different riding
modes available (see page 32 for more
information).
Daytime Running Lights (DRL)
Switch (if equipped)
Note
Daytime running lights are manually
operated. They are not automatic.
The daytime running lights or dip
beam can be selected with the Daytime
Running Lights (DRL) switch.
To select daytime running lights, push
the DRL switch forward.
To select dip beam, push the DRL switch
rearwards.
When the daytime running lights are
turned on, the daytime running lights
indicator light will illuminate in the
instrument panel.
40
can be canceled
and release

High Beam Light

When the high beam button is
pressed the high beam will be
switched on. Each press of
the button will swap between
dip and high beam.
the
Note
If daytime running lights are installed on
the motorcycle, the high beam button
has additional functionality.
If the DRL switch is in the daytime
running lights position, then press and
hold the high beam button to turn the
high beam on. It will remain on as long
as the button is held in and will turn off
as soon as the button is released.
Note
A lighting on/off switch is not installed
on this model. The tail light and license
plate light all function automatically
when the ignition is on.
The headlight will function when the
ignition is on. The headlight will go off
while pressing the starter button until
the engine starts.