Direction Turn Signal Switch; Horn Button; Pass Button; Fuel Requirement/Refuelling - Triumph Daytona 675 Owner's Handbook Manual

General Information

Direction Turn Signal Switch

When the turn signal switch is pushed to the
left or right and released, the corresponding
direction turn signals will flash on and off. To
turn off the turn signals, push and release the
switch.

Horn Button

When the horn button is pushed, with the
ignition switch turned to the ON position, the
horn will sound.

Pass Button

When the pass button is pressed, the
headlight main beam will be switched on. It
will remain on as long as the button is held in
and will turn off as soon as the button is
released.
Caution
The headlamp pass switch is intended for
intermittent use only. Use of the pass
switch for extended periods of time may
cause the fuse to fail resulting in loss of
headlamp operation.
56

Fuel Requirement/Refuelling

Fuel Grade

P b
cbny
This Triumph motorcycle is designed to run
on unleaded gasoline with a CLC or AKI
octane rating (R+M)/2 of 89 or higher for
Daytona 675 and 675 R models, or a CLC or
AKI octane rating (R+M)/2 of 87 or higher
for Street Triple and Street Triple R models.
Federal regulations require that pumps
delivering unleaded gasoline are marked
'UNLEADED' and that the Cost of Living
Council (CLC) or Anti-Knock Index (AKI)
octane rating is also displayed. These ratings
are an average of the Research Octane
Number (RON) and the Motor Octane
Number (MON).
Caution
The use of leaded gasoline is illegal in
some countries, states or territories. Check
local regulations before using leaded
gasoline.
Note:
• If 'knocking' or 'pinging' occurs at a
steady engine speed under normal
load, use a different brand of
gasoline or gasoline which has a
higher octane rating.