Turn Signal Switch; Horn Button; Cruise Control Button (If Equipped); Daytime Running Lights (Drl) Switch (If Equipped) - Triumph Bonneville Bobber Owner's Manual

Note
A lighting on/off switch is not installed
on this model. The position light, brake/
tail light and license plate light all
function automatically when the ignition
is turned to the ON position.
The headlight will function when the
ignition switch is turned to the ON
position. The headlight will go off while
pressing the starter button until the
engine starts.

Turn Signal Switch

When the turn signal switch is pushed
to the left or right, the corresponding
direction indicators will flash on and off.
The turn signal switch will always return
to the central position.
The turn signals can only be canceled
manually. To manually turn off the turn
signals, press and release the indicator
switch in the central position.

Horn Button

When the horn button is pushed, with
the ignition switch turned to the ON
position, the horn will sound.

Cruise Control Button (if equipped)

When the cruise control button is
pressed in, the cruise control is on. The
button remains in until it is pressed
again to turn off the cruise control.
General Information
Daytime Running Lights (DRL)
Switch (if equipped)
When the ignition is switched
ON and the daytime running lights
switch is set to DAYTIME RUNNING
LIGHTS, the daytime running lights
warning light will illuminate.
The daytime running lights and low
beam headlights are operated manually
using a switch on the left hand switch
housing (if equipped).
Warning
Do not ride for longer than necessary
in poor ambient light conditions with
the Daytime Running Lights (DRL) in
use.
Riding with the daytime running lights
when dark, in tunnels or where poor
ambient light is apparent may reduce
the riders vision or blind other road
users.
Blinding other road users or reduced
vision in low ambient light levels may
result in loss of motorcycle control
and an accident.
Note
During daylight hours the daytime
running lights improve the motorcycles
visibility to other road users.
Low beam headlights must be used in
any other conditions unless the road
conditions allow
headlights to be used.
for high beam
45