Table of Contents
Advertisement
Recording
TV Programs
Make sure that you have finished all the connections
and adjustments through pages 47 to 55.
e Tom: on the TV and select the video input on the TV
or select the channel for the recorder.
* REC LEVEL controls: [5] position
Hi GF switch: AUTO
PCM MODE selector: NORM
AUTO STEREO selector: ON
Operation a
You can aiso use the buttons on the VCR with the same
name or mark as those on the Commander.
1 Press OPEN/CLOSE and insert a cassette.
The power will be automatically turned on.
Press OPEN/CLOSE again to close the cassette
holder.
2 Select the recording speed (SP or LP).
3 Press INPUT SELECT so that the TUNER
indicator appears in the display window.
Tj
Bl ———J
4 Press TV/VTR
so that the VTR indicator appears
in the display window (only for a TV which is
connected to the VHF/UHF INPUT on this unit).
[G-2|
5 Select the channel to be recorded with the
number buttons.
e.g. To select channel 16
ENTER
C9 E19 FI
You can select the channel by scanning with
TRACK/CH
+/— or JOG.
§ Press two @ REC buttons simultaneously (r
slide @ REC on the VCR to the right) to siart
recording.
2To:stop: recording 'momentarily:
Press 1], PAUSE.
To resume recording, press 1§ PAUSE again or > PLAY.
To protect the video heads and -the tape, the pause
mode will be automatically released after about 7
minutes and recording will stop.
18
Advertisement
Table of Contents
