Table of Contents
Advertisement
LINE OUT
1 or 2 VIDEO
Uy LINE OUT
1 or 2 AUDIO
PCM MODE
AUDIO MONITOR
2:
Signal flow
"Editing. a 'Home Movie @ Tape from this —
VCR to. Another |
Example: Playing back with this VCR and recording with
a Beta or VHS format VCR
fice the supplied video connecting cord (equipped with
yellow plugs) for video connection and the supplied
audio connecting cord (equipped with red and white
plugs) for audio connection. If the audio input of another
VCR Is monaural, use the optional RK-C72 connecting
cord,
Preparation
« Hi & switch: AUTO
* PCM MODE selector: NORM
¢ EDIT button: ON (The EDIT indicator lights.)
¢ AUDIO MONITOR selector:
Select the sound to be recorded. (See page 13.)
1 Set the input selector on the other VCR to LINE.
2 Insert cassettes; a recorded cassette into this
VCR and a cassette for recording into the other
VCR.
3 Start playback with this VCR and start recording
with the other VCR.
Use of the EDIT button
¢ When editing a tape onto another VCR, press EDIT on
this VCR so that the EDIT indicator lights. Loss of
picture quality will be minimized. Be sure to turn off 'the
indicator by pressing EDIT after editing.
° The picture and tone quality of a newly edited tapes will
be noticeably impaired even if the EDIT button is
activated. Avoid repetition of editing tapes.
Picture adjustment during editing
The SHARPNESS control does not function while the EDIT
indicator is lit.
Note
Do not connect the same VCR to both the LINE IN and
LINE OUT jacks of this VCR. This may cause hum noise.
37
Advertisement
Table of Contents
