Table of Contents
Advertisement
PCM MODE
AUMO
MONITOR
During editing
The COUNTER RESET button does not function.
To cancel the assemble editing mode
Press SYNCHRO EDIT or g STOP on the Commander or
the VCR.
When assemble editing starts
The EDIT Indicator will tight automatically and go out when
the editing is completed.
Assemble-Editing Mma
Use this unit for playback and the other VCR for
recording.
For connection, see pages 39 and 40.
© Hi
switch: AUTO
* PCM MODE selector: NORM
e AUDIO MONITOR selector: Select the sound to be
recorded, (See page 13)
1 Insert cassettes; a recorded cassette into this
unit, and a cassette for editing into the
recording VCR.
2 Set the command mode selector on the
Commander to the appropriate position for the
recording VCR.
For the setting, see pages 39 and 40.
3 Locate the point of the tape where you want to
start editing on the recording VCR and set it to
recording pause mode.
4 Set the command moge selector on the
Commander to the appropriate position for this
VCR.
For the setting, see pages 39 and 40.
5 Play back the tape on this unit to locate the end
point to be edited and set the unit to playback
pause mode.
6 Press COUNTER RESET.
7 Rewind the tape on this unit to the start point
to be edited and set the unit to playback pause
mode.
8 Press SYNCHRO
EDIT.
The playback starts on this unit and the recording
starts on the other VCR.
9 To edit the next scene, repeat steps 2 to 8.
When you use JOG/SHUTTLE to locate the editing points
Be sure to press SYNCHRO EDIT after the transmitting
indicator goes out, otherwise the unit starts playback but
may pause again.
When the editing is completed
.
Set both VCRs to stop made.
41
Advertisement
Table of Contents
