Sony EV-S900 Operating Instructions Manual page 10

ww, : Signal flow
10
7 AUDIO/
VIDEO IN
7 'o.remotely 'control two - VCRs' (this" uhit-and.
If another VCR Is equipped with a command mode
selector
To avoid having this VCR and the other equipment
functioning simultaneously, set COMMAND MODE on
this VOR to the different command mode position from
the command mode on the other VCR. Simply by
switching the command mode selector on the
Commander, you can contro! two VCRs separately.
tf another VCR is not equipped with a command mode
selector ;
Set the command mode selector on the Remote
Commander as follows:
VTR1: for Sony Beta format VCRs
VTR2: for Sony 8 mm format VCRs
If another VCR is equipped with a CONTROL L jack
With control L connection you can remotely control the
other VCR by pointing the Commander to this VCR.
To remotely control this unit through the other
equipment [B-3] -
If your TV or TV tuner is equipped with a CONTROL S
output, you can operate this unit by pointing the
Commander equipped with this unit or the TV toward the
TV or TV tuner. This is convenient when the two units
are located apart from each other.