Table of Contents
Advertisement
LINE OUT
1 or 2 VIDEO/AUDIO
SLAVE | MASTER
~—
<2: Signai flow
CONTROL S
OUT
y
CONTROL S$
VIDEO/AUDIO
OUT
)
LINE IN 1 or 2
EV-S900
| VIDEO/AUDIO
x
wi: Signal flow
If you use a video editing controller (RM-E100V, etc.) or a
VCR with automatic assemble editing function (EDV-9500,
etc.), up to 8 scenes of the original tape can be
automatically edited onto another tape successively.
_ Using the Video Editing: Controller. .
RM- E100V - 'P.4
Connect another VCR and the controller as illustrated.
With this connection you can edit up to 8 scenes of the
original tape programmed on the controller onto another
tape. For details on operation, refer to the instruction
manual furnished with the controller.
Note
Be sure to set SLAVE/MASTER on this VCR to SLAVE.
When set to SLAVE, the control signal is transmitted
through the CONTROL L connector of the video editing
controller to remotely contro! this VCR.
~
Make the control S connection be vides the audio and
video connections.
Use this unit for recording and the oth." VCR for
playback.
You can edit up to 8 scenes of the original ta,¢
programmed on the other VCR onto the tape inse.ted in
this unit.
For details, refer to the instruction manual furnished with
the other VCR.
Notes
© Pre-roll operation will not be carried out on the EDV-9500.
¢ With this connection, automatic assemble editing or
insert editing using the SYNCHRO EDIT button cannot
be done.
45
Advertisement
Table of Contents
