Table of Contents
Advertisement
TAPE IN
(AUX IN)
LINE OUT 1 or 2
AuDIO
: Signal flow
'Connecting:an: Audio System GEA!
You can enjoy playback of tapes recorded in stereo or
recorded from an audio source such as an FM tuner or
CD player in digital multi audio system, when the VCR is
connected to your audio system.
For recording connect LINE IN 1 (or 2} AUDIO to the
tape outputs on a stereo amplifier with the supplied
audio connecting cord.
For playback connect LINE OUT 1 (or 2) AUDIO to the
tape Inputs or auxillary inputs on a stereo amplifier with
the supplied audio connecting cord (or optionL RK-C74
|
connecting cord).
Notes
:
e if the VCR is instatled near a tuner or a radio, noise may
be heard in AM reception.
° A PCM recorded tape has a wide dynamic range. Before
playing back a tape, turn down the volume on the
amplifier to avoid damaging the speakers.
¢ Before connecting or disconnecting the power cord of
the VCR, be sure to turn off the connected amplifier.
51
Advertisement
Table of Contents
