Table of Contents
Advertisement
Lights during timer setting.
Program number
Week
Day of the week
Gg
Lights in timer standby mode.
Suppose you want to make a recording of channel 8
from 7 P.M. to 7:56 P.M. on Friday this week.
1 Press THMER SET.
2 Set the week and day with JOG.
Then press NEXT.
3 Set the turn-on hour with JOG.
Then press NEXT.
4 Set the minute with JOG.
Then press NEXT.
5 Set the turn-off hour with JOG.
Then press NEXT.
6 Set the minute with JOG.
. . Then press NEXT,
7 Press REC MODE to select the recording speed
(SP or LP).
8 Set the channel to be recorded with JOG.
Then press NEXT.
Approximately three seconds later the display window
will change to the counter display. To preset another
program, repeat steps 1 to 8. Up to 6 programs can be
preset.
9 Press TIMER REC ON/OFF.
The power will be turned off and the VCR will enter the
standby mode.
Recording will start at the preset turn-on time and will
stop when the recording is completed. The power will be
iumed off automatically.
- 23
Advertisement
Table of Contents
