Table of Contents
Advertisement
as
"gynchronized Editing trom jonto. a Sony VCR with the Control Terminal ~
,
If another VCR is equipped with a control terminal
(CONTROL S, CONTROL L or REMOTE Jack), the two
VCRs can be operated simultaneously using the
SYNCHRO EDIT button.
"Connecting - a VCR. with. the CONTROL Ss.
IN- jack fe.
VIDEO/
other VCR for recording.
Use the optional RK-G69 connecting cord for CONTROL
S connection.
Connecting a VCR with hele CONTROE S.
_ OUT jack ita
LINE OUT
With this connection, use this unit for recording, and the
tor2
other VCR for playback.
cable.
Use the optional RK-G69 connecting cord for CONTROL
§ connection.
. To operate another. VCR connected to the
CONTROL S$ OUT jack of this VCR with the
supplied Remote Commander
Set the command mode selector on the Commander
according to the type of another VCR.
To operate a VCR without a command mode selector
[N-2]
VTRI1: for a Sony Beta format VCR
VTR2: for a Sony 8 mm format VCR
To operate a VCR equipped with a command mode
selector
Set the selector on the Commander to the same
command mode as that selected on the VCR.
To operate this VCR with the Commander
VIDEO;
;
Switch the command mode selector on this VCR to a
AUDIO
1 CONTROL
different position from that selected for the other VCR,
OUT
:
:
f S OUT
and set the command mode selector on the Commander
to the same position as that selected on this VCR.
Notes on connection
© {f another VCR is equipped with both CONTROL L and
y |b
CONTROL S$ jacks, CONTROL S connection is
RK-G68
recommended.
;
© If another VCR is equipped with an S VIDEO IN
LINE IN
connector, connect it to the LINE OUT 1 S VIDEO
Tor 2
connector of this unit instead of the connection between
VIDEO!
the phono-type video jacks. Use the supplied S VIDEO
2)
: Signal flow
39
Advertisement
Table of Contents
