Table of Contents
Advertisement
VIDEO/AUDIO
OUT
:
LINE IN
_ | 1 or 2 VIDEO/AUDIO
| Manual Editing fromlonto
a VCR Not Equipped with Control Terminal.
Using this VCR for recording [0-1]
For details on connection, see [L-7] on page 36.
Using this VCR for playback [0-2] (on the next page)
For details on connection, see [L-2] on page 37.
Operation
'Assemble editing.
4 Insert cassettes; a recorded cassette into the
playback VCR, and a cassette for editing into
the recording VCR.
2 Set the input selector on the recording VCR
according to the inputs connected to the
playback VCR.
3 Play back the tape on the recording VCR to
locate the point where editing should start and
set it to recording pause mode.
4 Play back the tape on the playback VCR to
locate the start point to be edited and set it to
playback pause mode.
5 Press ii PAUSE to release the pause mode on
both VCRs simultaneously.
§ Set both VCRs to pause mode at the point
where the editing should stop while watching
the playback picture.
7 To edit the next scene, repeat steps 3 to 6.
8 When editing is completed, set both VCRs to
stop mode.
43
Advertisement
Table of Contents
