Table of Contents
Advertisement
3 Use of the control panel
3.3.1
Description of the icons in the display
Tab.6
Icons
Icon
Description
User menu: user-level parameters can be configured.
Installer menu: installer-level parameter can be configured.
Information menu: read out various current values.
System settings: system parameters can be configured.
Error indicator.
Gas boiler indicator.
Domestic hot water tank is connected.
The outdoor temperature sensor is connected.
Boiler number in cascade system.
The solar calorifier is on and its heat level is displayed.
Burner output level (1 to 5 bars, with each bar representing 20% output).
The pump is running.
Three-way valve indicator.
Display of the system water pressure.
Chimney sweep mode is enabled (forced full load or low load for O
Energy-saving mode is enabled.
DHW boost is enabled.
Timer program is enabled: The room temperature is controlled by a timer program.
Manual mode is enabled: The room temperature is set to a fixed setting.
Temporary overwrite of the timer program is enabled: The room temperature is changed temporarily.
The holiday program (including frost protection) is active: The room temperature is reduced during your holiday to
save energy.
Frost protection is enabled: Protect the boiler and installation from freezing in winter.
Service notification: service needed.
Installer contact details are displayed or can be filled in.
Tab.7
Icons - On/off
Icon
Description
CH operation is enabled.
DHW operation is enabled.
The burner is on.
10
Tab.5
Available menus for the installer
Description
Disable installer access
Installation Setup
Commissioning Menu
Advanced Service Menu
Error History
Bluetooth
System Settings
Version Information
/CO
2
Icon
Description
CH operation is disabled.
DHW operation is disabled.
The burner is off.
Icon
measurement).
2
7734325 - v.07 - 22092022
Advertisement
Table of Contents
