P04 Auto Lock Function Setting - CLEAN Instruments PH200 Operation Manual

Dissolved Oxygen
DO200 Meter
·
New design, Comfortable holding, Easy carrying , Simple Operation
·
65*40mm, large LCD with backlight for easy meter information reading
·
IP67 rated, dustproof and waterproof, Floats on water
·
Unit display: mg/L or %
·
One key to check through all the settings, including: Zero offset, slope
and all the settings
·
Galvanic cell mode, without polarization, easy measuring
·
Auto lock function
·
50 data sets memory stores and recalls
·
Auto Power off saves battery after 10-mins non-use
·
2*1.5V 7AAA battery, long battery life
·
CP337 Operating Carrying Pouch
30

5.3.4 P04 Auto Lock Function setting

After entering P-04, you can select ON or OFF the Auto Lock Function by pressing
Auto Lock Function is ON, the meter can lock the measured value after the reading had stabilized
and display . Press to unlock.
Please refer to above description steps to set up P-04.
You can go to next parameter setting by pressing
back to measurement mode.
. If the
, or pressing key to quit and go
11