Table of Contents
Advertisement
SAFETY INFORMATION AND INSTRUCTIONS
1. Safe-T-Beam® (STB) Non-Contact Reversing System:
• Places an infrared beam across the door opening.
• Only active during the down travel of the door.
• Stops an open door from closing.
• The door will stop and reverse to the full open position if beam is obstructed while the door is closing.
• Reversing system can be overridden with constant pressure on the wall console until the door reaches the
closed position.
• If the door is stationary in any position other than fully closed, obstructing the infrared beam will cause the
work light to turn on for 4 minutes (if this feature has not been deactivated).
• Self-diagnostic LEDs on STBs and operator alert to operational issues (See Locating Safe-T-Beam® Pairs &
Troubleshooting section in this manual for more information).
2. Contact Reversing System:
• Automatically reverses a closing door upon contact with an obstruction (Force Control)
3. Manual Emergency Release pull handle & cord:
• Manually releases door from door operator. Used during a power failure or other emergency to allow
manual opening and closing of the door.
• DO NOT use emergency release cord to pull the door!
4. Automatic Lighting System:
• Lighting system turns ON when door is activated and automatically turns OFF 4 minutes later.
• Light can be activated/deactivated manually from the wall console.
5. Genie Battery Backup (BBU):
• Included or optional with select models. Provides power to operator in the event of a power failure. DO
NOT connect BBU until operator is fully installed, programmed and tested.
6. Integrated Aladdin Connect® (iDCM):
• Available with select models, allows operation of the garage door operator with a secure mobile device
application (app) from anywhere.
7. Wall Console:
• Operates door operator from inside garage with an open/close button. Has a light manual control and
override. Sure-Lock
8. Intellicode
Encryption Remotes (Optional):
®
• An encryption system that enhances the security of the door operator by continuously changing the access
code each time the remote is used.
4
7
8
security activate switch to lock out all remote control operation.
(TM)
4
6
5
3
2
1
Advertisement
Table of Contents
