Wireless Wall Console (If Applicable) - Genie GCL-LT Manual

WIRELESS WALL CONSOLE PROGRAMMING (IF APPLICABLE)
STEP 1) Program Wall Console to Garage Door Operator
1. Press and hold the program button on the operator until the round LED turns blue, then
release.
2. The round LED will go out and the long LED will begin flashing purple.
3. Press the DOOR button on the Wireless Wall Console 3 times or until door operates.
PRGM
SET
Solid Blue
NOTE: The operators LEARN LED will time out in 30 seconds.
Programming must be completed within 30 seconds.
STEP 2) Operating the Door with Wall Console
1
2
3
Wireless Wall Console LED Signals:
The Wireless Wall Console includes self diagnostic LEDs
• LED Blue Blink = Indicates NORMAL status.
• LED Red Blink = Indicates low battery.
Please see complete instructions that accompany wireless wall console.
30
Please see complete instructions that
accompany Wireless Wall Console.
Open cover &
remove battery
tab prior to
programming.
PRESS
&
RELEASE
Flashing Purple
1. DOOR Button - Runs garage door operator.
2. DELAY Button - Adds a 10+ second delay for door operation.
Press the delay button and door will automatically operate after
set delay.
3. LIGHT Button - Overrides the automatic timed light function of
the garage door operator.
PRGM
SET
Battery Tab