Assemble Operator; Install Rail Assembly To Operator - Genie GCL-LT Manual

UNPACK, INVENTORY, AND INSPECT ALL PARTS & ACCESSORIES THAT THIS OPERATOR SHOULD HAVE

INSTALL RAIL ASSEMBLY TO OPERATOR

1. Flip rail over and slide drive gear over motor shaft.
2. Install rail brackets onto rail and secure to
operator with 1/4"- 14 - 5/8" screws. Do not over-tighten.
FIG. 1. Do not install lens cover at this time.
8

ASSEMBLE OPERATOR

A
D
C
G
I
H
B
F
E
A = Operator assembly
B = Battery backup (BBU)
C = Wall console control
D = Lens cover
E = Curved door arm
F = Photocell kit
G = Rail assembly
H = Parts Bag
I = Parts Bag
FIG.1