Reviewing The Cadd-1 Programming Modes - SIMS Deltec CADD-1 5100 HFX Operator's Manual

3.9 Reviewing the CADD-1
Drug delivery begins in the Start mode. When the pump is in the Start mode,
programming is not possible, but you can review the pump's programming
modes. To review each mode in succession, press and release the SELECT MODE
key after each mode appears on the display.
While the pump is scrolling through the modes, the following applies:
The pump maintains its pumping rate.
•
The ML blinks when RES VOL and GIVEN appear on the display but stops
•
blinking when RATE appears.
® Programming Modes
29