Operator Instructions - SIMS Deltec CADD-1 5100 HFX Operator's Manual

3.0

OPERATOR INSTRUCTIONS

This section describes how to operate the CADD-1
step-by-step instructions that will enable you to perform the following tasks:
• Installing a battery and observing the Power up Test ............ (Section 3.1)
• Preparing to program the pump ........................................... (Section 3.2)
• Setting the reser voir-residual volume ................................. (Section 3.3.1)
• Setting the continuous rate ................................................ (Section 3.3.2)
• Programming for H igh Flow delivery ................................... (Section 3.4)
• Attaching the Cassette ....................................................... (Section 3.5.2)
• Priming the tubing ............................................................... (Section 3.6)
• Setting the lock levels (LL0, LL1, or LL2) ............................ (Section 3.7)
• Starting and stopping the pump ........................................... (Section 3.8)
• Reviewing the CADD-1
®
programming modes ..................... (Section 3.9)
® pump. It contains detailed,
9