Advertisement
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use onlya single-outletsurge suppressorthat meets all of the specifications described on page 8.
b_
If the walking belt is overtightened,treadmill perfor-
manca may decrease and the walking belt may be-
come damaged. Remove the key and UNPLUG THE
POWER CORD. Using the allen wrench, turn both
rear rolleradjustment bolts counterclockwise. 1/4 of a
turn. When the walking bolt is properly tightened, you
should be able to lift each side of the walking belt 2 to
3 inches off the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, in-
sert the key, and run the treadmill for a few minutes.
Repeat until the walking belt is propedy tightened.
b
Rear Roller Adjustment Bolts
c. If the walking belt still slows when walked on, please call our toll-free HELPLINE.
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt is off-center, first remove the key
and UNPLUG THE POWER CORD. If the walking
belt has shifted to the left, use the allen wrenchto
tum the left rear rollerbolt clockwise1/2 of s turn; if
the walking belt has shifted to the right, tum the
bolt countemlockwise1/2 of a turn. Be careful not to
overtightenthe walking belt. Plugin the power cord,
insertthe key, and run the treadmillfor a few minutes.
Repeat untilthe walking belt is cantered.
b.
If the walking belt slipswhen walked on, first remove
the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn bothrear rollerboltsclockwise,
1/4 of a turn. When the walking belt is correctly tight-
ened, you shouldbe able to lift each side of the walk-
ing belt 2 to 3 inches offthe walking platform.Be
careful to keep the walking belt cantered. Plug in the
power cord, insertthe key, and carefully walk on the
treadmill for a few minutes. Repeat until the walking
belt is propedytightened.
b
14
Advertisement
