Related Manuals for Digitus DN-651160
Summary of Contents for Digitus DN-651160
- Page 1 Industrial 8 + 4-port L3 managed Gigabit Ethernet (PoE) Switch Quick Installation Guide DN-651160, DN-651161...
-
Page 2: Table Of Contents
Table Content Overview ............. 3 Features ............3 Specification ..........4 3.1 standard ............4 3.2 Interface ............5 3.3 Work environment ........5 3.4 Switch ............5 3.5 Power supply ..........5 3.6 Mechanical characteristic ......6 3.7 Industrial standard ........6 Package............ -
Page 3: Overview
1. Overview This is a L3 managed industrial PoE Ethernet switch with 8 Port 10/100/1000Mbps RJ45 (PoE) +4 Port 1000/2500/10000Mbps SFP, support one console port. The Ethernet switch adopts Layer 2 protocol required by the industrial site to ensure the stability of the communication network. -
Page 4: Specification
VLAN: Support IEEE 802.1Q VLAN, effectively isolate the broadcast domain Link aggregation: support link static/dynamic aggregation, providing perfect bandwidth utilization QOS: Support COS\DSCP, 4 queues, support WRR\SP scheduling mode Security management: support ACL access control list, support 802.1X ... -
Page 5: Interface
3.2 Interface DN-651160: 8 Port Gigabit RJ45 + 4port 10G SFP DN-651161: 8 Port Gigabit RJ45 (PoE) +4 Port 10G SFP 3.3 Work environment Working temperature: -40～80 °C storage temperature: -40～85 °C relative humidity: 5%～95% (no condensation) 3.4 Switch Bandwidth (switch capacity): 1.2Tbps... -
Page 6: Mechanical Characteristic
3.6 Mechanical characteristic IP40 aluminum housing DIN rail installation Natural colling, no fan Weight: 0.8Kgs Measurement: 175.6 x 135 x 45.5 mm 3.7 Industrial standard FCC CFR47 Part 15, EN55032, Class A IEC61000-4-2 (ESD): ±8kV (contact), ±12kV (air) IEC61000-4-3 (RS): 10V/m (80~1000MHz) IEC61000-4-4 (EFT): Power Port: ±2kV;... -
Page 7: Switch Panel
5. Switch Panel Side panel: P1 and P2 are the number of connecting terminals, P+1 and P-1 are respectively to the positive and negative poles to be connected; Earthing screw used for earthing equipment. Front panel: the yellow light on RJ45 port is the link light. -
Page 8: Led Indicator
Switch size (mm) 175.6* 135*45.5 6. LED Indicator LED Indicator Status Definition Power work in Red LED on normal Power No power or Red LED off power in trouble Ethernet work in Yellow LED on normal Link Yellow LED communication flashing RJ45 LED in normal... -
Page 9: Installation Caution
Green LED System run in slowing normal flashing Optical work in Optical LED Green LED on normal 7. Installation Caution 7.1 Installation precautions In order to avoid damage to equipment and personal injury caused by improper use, please follow the following precautions: ... -
Page 10: Din Rail Installation
7.2 Din rail installation The first step is to check the grounding and stability of the guide rail: the guide rail slot of the switch is clamped into the guide rail; the second step: from the center to both sides of the guide rail positioning screws in order. -
Page 11: Management System Login
8. Management system Login This series of Managed ethernet switches provides a serial port-based management system program debugging port. Located at the front of panel to log in to the command line. Console port: baud rate 115200 Web IP: 192.168.10.12 User name: admin Password: admin For detail Web manual support, please visit product... - Page 12 This is a Class A product. In home environment, this product may cause radio interference. In this case, the user may be required to take appropriate measures. Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content.
Need help?
Do you have a question about the DN-651160 and is the answer not in the manual?
Questions and answers