Table of Contents
Advertisement
OWNER/INSTALLATION MANUAL
4�6 OPERATING INSTRUCTIONS
a� Power On & Power Off
Press
to power on or power off the heat pump.
b� Temperature Setting
Press
-
to display and adjust temperature.
+
c) Mode selection
1. Heating/Cooling/Auto modes
Press
to choose heating, cooling and automatic
mode.
In heating mode the
In cooling mode the
In automatic mode the
on.
2. Whisper and Boost modes
Press
to start Boost mode, and light will turn on.
Press
to start Whisper mode, and light will turn
on. (Default mode is Boost).
Please choose Boost mode
30
light is on.
light is on.
and
the lights are
for initial heating.
c� Defrosting
1. Automatic defrosting
When machine is defrosting, the
after defrosting the
2. Forced defrosting
When the heat pump is heating and the compressor
has been working continuously for at least 10 minutes,
press
and
on the touchscreen controller
-
+
simultaneously for 5 seconds to start forced defrosting.
The
lamp flashes and defrost starts,
when the
lamp stops flashing defrosting stops.
The interval between forced defrosts must be more
than 30 minutes.
During a normal defrost the heat pump may exhaust a
significant amount of vapour or mist into the air.
It is normal for ice to form on the evaporator fins but if
significant amounts of ice remain after a defrost, switch
the heat pump off and allow the ice to melt.
lamp flashes;
lamp is illuminated.
1007929 ISSUE 1
Advertisement
Table of Contents
