4�2 Operating Instructions - Calorex C-PAC+ CPT6 ALY Owners & Installation Manual

4�2 OPERATING INSTRUCTIONS
Remember that at start-up there is a 3 minute time delay before the heat pump starts
a� Power On
Press the to power on. Press
heat pump in standby mode.
b� Temperature Setting
Press the p or q buttons to raise or lower the
temperature. The symbol will flash.
SET
To save the changes press the
c� Heat mode selection
The default setting for the heat pump is heating. If you
require cooling or automatic heat/cool options, please
instruct your installer to activate these.
When in heating mode the
When in cooling mode the
d� Defrosting
This is an automatic function. When heat pump is
defrosting the symbol will appear. It will disappear
when defrost is complete.
e� Clock setting
Press the to enter the timer settings. The
icon will flash. Press
M
Press again to set minute with p and q.
M
Press to save settings.
SET
1006905 ISSUE 2
IMPORTANT
again to put
button.
SET
symbol is displayed.
symbol is displayed.
to set hour with p and q.
f� Timer setting
The programmable timer allows for the heat pump to
run for three timed periods in one day.
Each period can be set, but an ON and OFF time needs
to be set for each.
Press the to enter the timer settings.
The icon will flash, displaying the actual time.
Press again to enter timer. Press
with p and q. Press
M
p and q. If you need to cancel timer settings, press
and '--:--' will display.
M
Press to save settings and enter into the next
SET
group of timer setting,
To enter then next timer settings without saving,
press .
If you need to cancel timer settings, press
'--:--' will display.=
to set hour
M
again to set minute with
and
M
21