Table of Contents
Advertisement
OWNER/INSTALLATION MANUAL
4�2 OPERATING INSTRUCTIONS
Remember that at startup there is a 1 minute time delay before the heat pump starts
a� Power on�
Press
to power the unit on or off. Note. a short
press will return the controller to main menu.
b� Temperature setting�
Press p and q to display and adjust the set
temperature. Press
main screen.
c� Mode Selection
Press
M
to enter mode.
Powerful mode indicator lamp lit.
Powerful
Smart mode indicator lamp lit
Smart
Silent mode indicator lamp lit
Silent
d� Heat mode selection
Press
to switch between heating and cooling.
M
Heating= Heating indicator lamp lit and H on display.
Cooling= Cooling indicator lamp lit and C on display.
20
IMPORTANT
to save settings and return to
e� Defrosting
1. Automatic defrosting. When machine is defrosting
the heating indicator lamp flashes; after defrosting the
flashing stops.
2. Forced Defrosting. When machine is heating and
the compressor has been running continuously for 10
minutes. Press p and q together for 5 seconds. the
heating mode lamp flashes and defrost starts. When
defrosting is exited the display returns to normal.
f� Clock Setting
Turn the heat pump off via the
enter the clock settings. Press
flashes. Using the p and q set the hour. Press
again to make the minutes flash and use the p and
M
q to set. Press the
main display. Press the
back on.
M
. Press
to
and the hour
M
M
once more to return to the
to turn the heat pumps
1005759 ISSUE 2
Hide quick links:
Advertisement
Table of Contents
