Table of Contents
Advertisement
OWNER/INSTALLATION MANUAL
4�2 OPERATING INSTRUCTIONS
Remember that at startup there is a 1 minute time delay before the heat pump starts
a� Screen lock
1. Press
for 3 seconds to lock or unlock the
screen. The buttons will turn dark when the
controller is locked.
2. Automatic lock period: 30 seconds if no operation.
b� Power on
Press
for 3 seconds to unlock screen.
Press
to power on the heat pump.
c� Temperature setting
Press
and
to display and adjust the set
temperature.
d� Mode selection
1. Heating/Cooling/Auto
Press
to switch between heating,
cooling, and automatic modes.
Mode
Symbol
Heating
Cooling
Auto
22
IMPORTANT
Water temperature
setting range
18-40°C
12-30°C
12-40°C
e� Speed Mode selection
Press
to switch between Boost mode
Whisper mode.
Default mode: Boost.
Please choose Boost mode
f� Wi-Fi
When the screen is on,
after
flashes, enter Wi-Fi connection.
Connect Wi-Fi on mobile phone and input password,
then control equipment by Wi-Fi. When APP connects
Wi-Fi successfully
light is on.
g� Defrosting
1. Automatic defrosting: When the heat pump is
defrosting, the
lamp flashes; after defrosting
the
lamp stops flashing.
2. Forced defrosting: When the heat pump is heating
and the compressor has been running continuously
for at least 10 minutes, press
simultaneously for 5 seconds to start
forced defrosting.
The
lamp flashes and defrost starts, when the
lamp stops flashing defrosting stops.
The interval between forced defrosts must be more
than 30 minutes.
During a normal defrost the heat pump may exhaust a
significant amount of vapour or mist into the air
and
for initial heating.
press for 3 seconds,
and
1007929 ISSUE 1
Advertisement
Table of Contents
