Operating Instructions - Calorex VPT Series Owners & Installation Manual

OWNER/INSTALLATION MANUAL

4.2 OPERATING INSTRUCTIONS

Remember at at startup ere is a 1 minute time delay before e heat pump starts
a. Power on.
Press to power e unit on or off. Note. a short
press will return e controller to main menu.
b. Temperature setting.
Press and to display and adjust e set
temperature. Press
main screen.
c. Mode Selection
Press to enter mode.
M
Powerful mode indicator lamp lit.
Powerful
Smart mode indicator lamp lit
Smart
Silent mode indicator lamp lit
Silent
d. Heat mode selection
Press to switch between heating and cooling.
M
Heating= Heating indicator lamp lit and H on display.
Cooling= Cooling indicator lamp lit and C on display.
20
IMPORTANT
to save settings and return to
e. Defrosting
1. Automatic defrosting. When machine is defrosting
e heating indicator lamp flashes; a er defrosting e
flashing stops.
2. Forced Defrosting. When machine is heating and
e compressor has been running continuously for 10
minutes. Press and
heating mode lamp flashes and defrost starts. When
defrosting is exited e display returns to normal.
f. Clock Setting
Turn e heat pump off via e
enter e clock settings. Press
flashes. Using e and
again to make e minutes flash and use e
M
to set. Press e
main display. Press e
back on.
toge er for 5 seconds. e
. Press to
M
and e hour
M
set e hour. Press
M
and
once more to return to e
to turn e heat pumps
1005759 ISSUE 3