Chapter 3. Usage - Renesas RAJ306101 User Manual

Solution starter kit motor control evaluation system - motor control

Table of Contents

RAJ306101 RSSK User's Manual

Chapter 3. Usage

The RAJ306101 RSSK is available for evaluation with some kinds of motor control methods by using the

Evaluation Board, and Motor attached in this evaluation kit. This evaluation kit includes the following can be

evaluated for two different control methods with sample programs. This chapter describes the control

specifications, board settings, and operation guide when using the sample programs.

For details of the sample programs, please refer to the application notes and source files of each sample

program.

- Sensorless vector control (Application Note: R18AN0060EJ (Factory default FW))

- Sensorless 120-degree conducting control (Application Note: R18AN0058EJ)

For changing the sample program, refer to Chapter 5 Emulator Function and the manual for each

development environment.

The appropriate board settings are required for each control method. Refer to the corresponding section for

the board settings.

Using 0[Ω] resistors or short-circuiting with solder is required to change the board settings.

Note.1

Note.1: This product does not include replacement 0[Ω] resistors. 0[Ω] resistors should be prepared by the user or short-circuited by

soldering.

R12UZ0129EJ0100

Rev.1.00

Page 14 of 55

Nov 1, 2023

Table of Contents