Skycutter; Safety Precautions - JLG B300001393 Operation And Safety Manual

6.3

SKYCUTTER™

SkyCutter™ is capable of cutting up to a thickness of 3/8" metal. It
can produce 27 A at 92 VDC at 35% duty cycle or 14 A at 92 VDC
at 60% duty cycle. It receives power from the SkyPower™ system.
3121615

Safety Precautions

DO NOT OVERLOAD PLATFORM.
DE-RATE THE PLATFORM BY 70 LBS (32 KG) WHEN ACCESSORY IS IN THE PLATFORM.
• Check for cracked welds and damage to plasma supports.
• Check for secure installation of cutter and bracket.
• Ensure no personnel are beneath platform.
• Do not exit platform over rails or stand on rails.
• Use this option only on approved models.
• Keep lanyard attached at all times.
• Use correct cutting settings.
• Do not use electrical cords without ground.
• Do not use electrical tools in water.
• Do not cut platform, or ground through the platform.
• Wear proper cutting apparel.
• Do not drive machine while connected to external air/gas
sources.
SECTION 6 - ACCESSORIES
6-5