Brother 882-T52 Operation Manual page 4

• Do not place this machine on an unstable surface,
such as an unsteady or slanted table, otherwise the
machine may fall, resulting in injuries.
• While attaching or detaching an embroidery frame
or other included accessory or while maintaining
the machine, be careful not to hit the machine with
your body or any other part of it.
6
Special care is required when embroidering:
• Always pay close attention to the needle. Do not use
bent or damaged needles.
• Keep fingers away from all moving parts. Special
care is required around the machine needle.
• While the machine is in operation, keep your hands
away from the needle bar case and all moving parts
near the needle bar case, otherwise injuries may
result.
• Switch the machine to the symbol "O" position to
turn it off when making any adjustments in the
needle area, such as changing the needle.
• Do not use a damaged or incorrect needle plate, as
it could cause the needle to break.
7
This machine is not a toy:
• Your close attention is necessary when the machine
is used by or near children.
• This machine is not intended for use by young
children or infirm persons without supervision.
• Young children should be supervised to ensure that
they do not play with this machine.
• This product contains small parts. Keep the product
out of the reach of children to prevent accidental
ingestion of small parts.
• Do not use the included scissors or seam ripper in
any other way than how they are intended. In
addition, when opening a hole with the seam ripper,
do not place your hands or fingers in the cutting
path, otherwise injuries may result if the seam ripper
slips.
• The plastic bag that this machine was supplied in
should be kept out of the reach of children or
disposed of. Never allow children to play with the
bag due to the danger of suffocation.
• Do not use outdoors.
8
For a longer service life:
• When using and storing this machine, avoid direct
sunlight and high humidity locations. Do not use or
store the machine near a space heater, iron, halogen
lamp, or other hot objects.
• Do not use cleansers or organic solvents, such as
thinner, petroleum ether or alcohol, to clean the
2
machine. Otherwise, the finish may peel off or
become scratched.
• Always consult the Operation Manual when
replacing or installing any assemblies, the presser
feet, needle, or other parts to assure correct
installation.
9
For repair or adjustment:
• Do not try to disassemble, repair or alter this
machine in any way, otherwise a fire, electric shock
or injuries may result.
• If the light unit is damaged, it must be replaced by
an authorized Brother dealer.
• In the event a malfunction occurs or adjustment is
required, first follow the troubleshooting table in the
back of the Operation Manual to inspect and adjust
the machine yourself. If the problem persists, please
consult your local authorized Brother dealer.
Use this machine only for its intended use as described
in the manual.
Use accessories recommended by the manufacturer as
contained in this manual.
Use the interface cable (USB cable) included with this
machine.
Values and measurements provides in inches are
approximate. Actual values are provided in the metric
unit of measurement.
The contents of this manual and specifications of this
product are subject to change without notice.
For additional product information and updates, visit
our website at www.brother.com