Dhcp Server - AVM Fritz!Box 7270 Installation, Configuration And Operation

DHCP Server

3.2 DHCP Server
FRITZ!Box Fon WLAN 7270
The FRITZ!Box is equipped with its own DHCP server. The
DHCP server is enabled by default in the factory settings.
Every time the operating system on a computer connected
with FRITZ!Box is started, it is assigned an IP address by the
DHCP server.
Only one DHCP server may be active within any network.
Factory Settings
All computers are located in the
same IP network
IP address
Subnet mask
DHCP server
The IP address, the corresponding subnet mask and the ac-
tivated DHCP server automatically yield the following val-
ues:
Network address of the subnet
Entire IP address pool for the com-
puters
Address pool of the DHCP server
In every subnet of the FRITZ!Box, the addresses 20 through
200 in the fourth group of numerals of the IP address are
reserved for the DHCP server.
Assigning the IP addresses via the DHCP server ensures
that all of the computers connected with the FRITZ!Box are
located in a single subnet.
enabled
192.168.178.1
255.255.255.0
enabled
192.168.178.0
192.168.178.2 -
192.168.178.253
192.168.178.20 - 200
134