Using WLAN adapters from Other Manufacturers
WPA Not
Supported
FRITZ!Box Fon WLAN 7270
If your WLAN adapter does not support WPA, you must con-
vert the encryption in the FRITZ!Box to WEP. For this you
must change the WLAN settings in the FRITZ!Box. To do so,
proceed as follows:
1.
Connect the FRITZ!Box and the computer using the
network cable (yellow) (see the section "Connecting
Computer(s) to the LAN Port" on page 16).
2.
Start a web browser on the computer.
3.
Enter
fritz.box
4.
Select the "Advanced Settings / WLAN / Security"
menu in the "Settings" area.
5.
Then select WEP encryption and enter a network key.
6.
Click the "Apply" button.
A window is displayed with the WLAN security set-
tings.
7.
Print out the page by clicking the printer icon in the
toolbar.
8.
Close the user interface and clear the connection be-
tween the FRITZ!Box and the computer. Remove the
network cable (yellow).
9.
Configure your WLAN adapter with the security set-
tings entered in the FRITZ!Box.
The WLAN connection between your WLAN adapter and the
FRITZ!Box will be established.
in the address line of the browser.
21