AVM Fritz!Box 7270 Installation, Configuration And Operation page 89

Call Tracing (MCID) on the ISDN Line
FRITZ!Box Fon WLAN 7270
the "Suspend/Resume" feature is not enabled on your line.
It is also possible that the parked-call ID you chose is al-
ready in use.
You can resume the suspended call using another ISDN de-
vice on the S bus.
0
Suspending/Resuming a Call
P
You are talking to a caller.
R
Press the Hold button. Caller 1 is now suspended.
s1<PC>s
Dial the sequence shown at left. Type in a code for
the suspended call as <PC> (parked-call ID). The
code can be any number between 0 and 99.
You will need to enter this code again when you
resume the call.
Q
After the acknowledgement tone, the connection
is suspended. You can hang up the handset. The
O
call remains suspended at the ISDN provider's lo-
cal switch for two minutes.
Call Tracing (MCID) on the ISDN Line
You can use this function during a call or after the caller
hangs up. For more information about this feature, contact
your ISDN provider.
Call Tracing (MCID)
Rs39r
Dial the sequence shown at left.
Room Monitoring (Baby Monitor)
The following key sequence enables the function for moni-
toring the sound level in a room. First enter the volume lev-
el (a value between 1 and 8). Enter a telephone number. Do
not hang up the handset! When the volume in the room
reaches the specified level, the number you entered will be
dialed. When the telephone rings and you pick up the
handset, you will be connected with the telephone on
which you enabled the room monitoring function.
When using this feature, it is advisable to activate the
speaker phone function.
89