AVM Fritz!Box 7270 Installation, Configuration And Operation page 85

Consultation / Hold
FRITZ!Box Fon WLAN 7270
Consultation / Hold
The Consultation/Hold feature allows you to place an exist-
ing call on hold. You then may consult with someone else at
your workplace or dial a second call. The party on hold
does not hear the second conversation. Once you have fin-
ished the consultation, you can return to the original con-
nection.
Consultation / Hold
Call 1
P
R
M
Call 2
P
R
R1
If you return to Caller 1 by pressing the Hold button, the
connection to Caller 2 is not cleared down until Caller 2
hangs up.
Ending Consultation
Call 1 You can also return to Caller 1 by hanging up
the handset: this ends the connection to
P
Caller 2. In this case, your phone rings as
soon as you hang up. Pick up the handset to
return to Caller 1 again.
O
Hang up the handset to end the connection.
You are talking to Caller 1.
Press the Hold button. Caller 1 is now on hold
and you can consult someone else.
To establish a second call, simply dial ss
plus the desired extension number for an in-
ternal call, or the desired external number.
If the call is answered, you can consult on
this line. The original caller is still on hold.
If the number you dialed is busy or the call is
not answered, press the Hold button again to
return to Caller 1.
To switch back to Calller 1 after talking on the
second connection, dial the sequence shown
at left. Caller 1 is now active again.
85