AVM Fritz!Box 7270 Installation, Configuration And Operation page 75

Disabling Automatic Outside Dialing
FRITZ!Box Fon WLAN 7270
Enabling Connected Line Identification Restriction (COLR)
Permanently
N
r53<Ext.>s1s Dial the sequence shown at left to disable
r91ss
O
Enabling Connected Line Identification Presentation (COLP)
Permanently
N
r53<Ext.>s0s
r91ss
O
Disabling Automatic Outside Dialing
The offers the possibility of disabling automatic outside di-
aling. This means that you will receive an internal dialing
tone when you lift the handset at the corresponding exten-
sion. This makes sense at any extension which is used to
make many internal calls, for instance, between the exten-
sions of the FRITZ!Box. When automatic outside dialing is
disabled, for an external call the 0 must be dialed before
the telephone number.
Pick up the handset.
transmission of the connected line's num-
ber.
Save your settings if desired by dialing the
sequence shown at left.
Hang up the handset.
Pick up the handset.
Dial the sequence shown at left to enable
transmission of the connected line's num-
ber.
Save your settings if desired by dialing the
sequence shown at left.
Hang up the handset.
75