Mounting / Unmounting; Mounting The Dvi Splitter; Unmounting The Dvi Splitter - Beckhoff CU8810-0010 Installation And Operating Instructions Manual

Installation

3.2 Mounting / Unmounting

The CU8810-0010 can be snapped onto a 35 mm mounting rail conforms to EN 50022.

3.2.1 Mounting the DVI Splitter

Just push the unit on the lower side under the rail (1) and snap in the upper side (2) as shown below:

3.2.2 Unmounting the DVI Splitter

To release the CU8810-0010 from the mounting rail push up the unit (3) and pull off the device from the
rail (4):
10 CU8810-0010