Software Version; Cleaning - TechniSat DigitRadio 370 CD BT Nero Manual

> [Restarting...] appears on the display.
The device will switch to standby after successfully resetting to the factory
settings. Switch it on to launch another station scan via DAB+.

13.5 Software version

Under Software version you can retrieve the currently installed software version.
> Press the MENU button and use the / buttons to select the [System
settings] > [Software version] item, then press ENTER.
> The current software version is displayed.

14 Cleaning

To prevent the risk of electric shock, you must not clean the device using a wet
cloth or under running water. Prior to cleaning, pull out the mains plug and
switch off the device!
You must not use scouring pads, scouring powder and solvents such as
alcohol or petrol.
Do not use any of the following substances: saltwater, insecticide, chlorine-
based or acidic solvents (ammonium chloride).
Clean the housing using a soft, damp cloth. Do not use spirit, thinners, etc.;
you could damage the surface of the device.
Only clean the display with a soft, cotton cloth. If required, use a cotton cloth
with small amounts of non-alkaline, diluted, water-based or alcohol-based
soap solution.
Gently clean the surface using the cotton cloth.
DE
EN
NL
FR
PL
75