Cancelling Pairing; Cd Player; General Information On Cds/Mp3 Cds - TechniSat DigitRadio 370 CD BT Nero Manual

Depending on the Bluetooth protocol of your external device, you can control
the music playback using the playback buttons on the remote control.
Playback / pause
Next track
Previous track
Track from beginning
Stopping playback
Alternatively, you can use the playback control for the music App on your
external device.
If no sound is being played, or no device is paired, the DIGITRADIO 370/371 CD
BT switches to standby mode after approx. 15 minutes.

8.3 Cancelling pairing

To cancel an active pairing, select MENU > Disconnect and press the ENTER button.
Note that the device to be decoupled must be connected to the DIGITRADIO 370/371
CD BT if you want to decouple it. Then you can pair a new device, as described in
Section 8.2.
Alternatively, you can also cancel the pairing on your external device. Follow
the instructions in the device manufacturer's instruction manual.

9 CD player

9.1 General information on CDs/MP3 CDs

The device is designed for music CDs that are played with audio data (CD-DA or MP3
for CD-R and CD-RW). MP3 formats must be created with ISO 9660 Level 1 or Level
2. Multi-session CDs cannot be read.
In MP3 mode, the terms "Folder" = Album and "Track" are critical. "Album"
corresponds to the folder on the PC, "track" to the PC file or a CD-DA track.
The device sorts the albums or the tracks of an album into alphabetical order by
name. If you prefer a different order, change the name of the track or album and
place a number in front of the name.
When burning a CD-R and CD-RW with audio data, various problems can arise which
could occasionally compromise smooth playback. This is caused by faulty software
and hardware settings or the blank disc being used. If errors occur, you should
contact your CD burner's/burner software provider's customer service department or
search for relevant information - e.g. on the Internet.
64
- button
- button
- 2 x button
- button
- button