Play Intro; Programming Function; Ejecting The Cd; Playing Music From A Usb Device - TechniSat DigitRadio 370 CD BT Nero Manual

9.8 Play intro

When Play intro is enabled, only the first 10 seconds of each track are played.
> Press the INTRO button to stop playing intros.
> Press the button once more to disable the function again.

9.9 Programming function

With the programming function, you can play up to 20 tracks on a music CD or an
MP3 CD in an order determined by you.
You can only undertake the programming if there is a disc inserted and the
device is in stop mode.
> Press the PRESET button on your remote control.
> The track number (T) now flashes in the display. [P01] appears to the left of
this. P01 is the first programming slot. Any tracks you want can then be set up
in sequence in the programming slots.
> Use the Previous track
programmed.
> Press the ENTER button to accept the track.
> The second programming slot (P02) is then active. Proceed as described
above to save a track to programming slot 2. Do this to save the tracks you
want to all the programming slots.
> Press the Play/Pause
If you press Stop, change the source or remove the CD, the programming is
deleted.

9.10 Ejecting the CD

> Press the EJECT button to eject the CD.
Always stop the playback prior to removing the CD.

10 Playing music from a USB device

You can play MP3 audio files stored on a USB data medium on the
DIGITRADIO 370/371 CD BT.
To play from a USB data medium, this must be connected to the USB port
(15).
The device does not support the connection of USB media (hubs, etc.) via a
USB extension cable.
Not suitable for direct connection to PCs!
or Next track
button to play the programmed tracks.
to select the first track to be
DE
EN
NL
FR
PL
67