Software Version; Cleaning - TechniSat TECHNIRADIO SOLAR Instruction Manual

All previously stored stations and settings will now be deleted. The device is
now in the same status as when delivered.
> The display will show [Restart ...] and the device will start with the language
selection [Language]. Using the Next/Prev. button, select one of the available
languages and confirm by pressing the Select button. Following this, the
device automatically performs a complete scan in DAB mode. While scanning,
the display information shows the progress, as well as the number of digital
radio stations detected. After completing the station scan the first DAB+
channel is played.

9.6 Software version

Under SW Version you can retrieve the currently installed software version.
> Keep the Menu button pressed and use the Next/Prev. button to select the
item [System]. Press Select.
> Select the item [SW version] with Next/Prev..
> Press Select. The current software version is displayed.

10 Cleaning

To prevent the risk of an electric shock, you may not clean the device using a
wet cloth or under running water. Switch off the device before cleaning!
You may not use scouring pads, scouring powder and solvents such as alcohol
or petrol.
Do not use any of the following substances: saltwater, insecticide, chlorine-
based or acidic solvents (ammonium chloride).
Clean the housing using a soft, moist cloth. Do not use spirit, thinners, etc.; you
could damage the surface of the device.
Only clean the display with a soft, cotton cloth. If required, use a cotton cloth
with small amounts of non-alkaline, diluted, water or alcohol-based soap
solution.
Gently clean the surface using the cotton cloth.
DE
EN
FR
IT
NL
PL
CZ
51